Instruction continously
My continuously embroidery is not specialized for the Husqvarna Endless Hoop. As long as the designs fit in your hoop you can do endless borders. You will find Continously designs in the category Continously. Really it's a very simple technique. The embroidery ends with a single stitch and you align the first stitch in the next embroidery to that. The following instructions will show you how simple it is.
Fold the fabric where the center of the embroidery are to be sewn. Either iron or...
...make a line with a pen that dissolve after a while.
Mark the start of the design.
Use the fold or the line to center the fabric in the hoop. Make sure the start point are in the sewing field. Hoop the fabric with stabilizer of your choice.
At the machine go to first stitch. Align the needle to the mark you have set for the start of the embroidery. Note: The embroidery foot are only removed to view the needle position better.
Step forward to the second color. You don't need to sew the first color.
Sew the embroidery as usually. Don't cut away the odd stitch in the end. This is your alignment stitch.
Re-hoop the fabric and make sure the fold or line are in the center and the alignment stitch are inside the sewing area.
This time go to the first stitch. Align this with the aligning stitch. Note: The embroidery foot are only removed to view the needle position better. Click to the next color or next stitch. Embroider the file. Re-hoop and embroider until there is one more to embroider. Open the file with -end in the name and do the same procedure. Done.
Note: not all continuously embroidery will have a separate file for the end.
This table runner is made of four hoopings in each half.
Language
Currency
Shopping Basket
View Basket
Recover Basket
Order
Do you need more help don´t hesitate to contact me.
These pages will open in new windows so you can read them while still in the checkout phase.
